Skip to content
Trademarks and datasheets are the property of their respective owners

XL6009 Automatic Buck-Boost Converter Module

Published Updated 6 views

XL6009 overview

A buck converter (step-down converter) is a DC-to-DC power converter that steps down voltage (while stepping up current) from its input (supply) to its output (load) On the other hand A boost converter is a DC-to-DC converter with an output voltage greater than the source voltage. Auto start voltage will be pulled down to 7V or less, and the engine will be at high speed when the voltage is up to 15V or higher. It is hard to work for 12V electrical equipment, this automatic buck-boost module can solve this problem, regardless of whether the input voltage is 5V or 12V, or 32V, the output can be stabilized at 12V. Built-in 4A efficient MOSFET switches enable efficiency up to 94%; (LM2577 current is 3A)High switching frequency 400KHz, the ripple is smaller, dimension is smaller. (LM2577 frequency only 50KHz)

Key specifications

Model Specification
DSN6000AUD Automatic Buck module
Module Properties
Non-isolated boost (BOOST)
Rectification
None- Synchronous Rectification
Input Range
3.8V - 32V
Output Range
1.25V - 35V
Input Current
3A ( max ), no-load 18mA (5V input, 8V output, no-load is less than 18mA. Higher the voltage, the greater the load current.)
Conversion efficiency
<94% ( the greater the pressure, the lower the efficiency )
Switching frequency
400KHz

Datasheet

xl6009-dc-dc-converter-datasheet.pdf
Format PDFSize 3.9 MBLanguage EN
Third-party / unverified source

XL6009 features

  • Adjustable potentiometer onboard for output voltage adjustment.
  • Non-isolated constant voltage module.
  • Non - synchronous rectification.

XL6009 pinout

NameDescription
IN+Positive input (Unregulated or Regulated)
IN-Negative input (Ground)
OUT+Positive Output (Regulated)
OUT-Negative Output (Ground)

XL6009 specifications

Model Specification DSN6000AUD Automatic Buck module
Module Properties Non-isolated boost (BOOST)
Rectification None- Synchronous Rectification
Input Range 3.8V - 32V
Output Range 1.25V - 35V
Input Current 3A ( max ), no-load 18mA (5V input, 8V output, no-load is less than 18mA. Higher the voltage, the greater the load current.)
Conversion efficiency <94% ( the greater the pressure, the lower the efficiency )
Switching frequency 400KHz
Output Ripple 50mV ( the higher the voltage, the greater the current, the greater the ripple )
Load Regulation ± 0.5%
Voltage Regulation ± 0.5%
Operating Temperature -40 - +85
Dimensions 48mm * 25mm * 14mm ( L * W * H )

XL6009 applications

  • Car Regulatorssolar photovoltaic
  • Wind Power

XL6009 datasheet PDF preview

PDF · 3.9 MB

Comments 0

Leave a comment