50kg Load Cell Half bridge Load Cell SC902

50kg Load Cell is a half-bridge load cell sensor, which is widely used in weight scales. When the half-bridge is being stretched, it sends a signal via the red signal wire. You can use multiple load sensors simultaneously to increase the capacity range. Two sensors full-bridge measurements: 50kgx2=100kg Four sensor full-bridge measurements: 50kgx4=200kg Parallel use to add additional capacity.This weight sensor (Half-bridge Load Cell 50KG) is suitable for electronic balance and other high-accuracy electronic weighing devices.

When measuring, the correct force is applied to the outer side of the strain E-shaped beam portion of the sensor (i.e., a strain gauge affixed to the middle, with a beam of white plastic cover arm) and the outside edges to form a shear force in the opposite direction, (i.e., in the middle of strain beam bending necessary changes can occur under stress, strain beam side by another force can not have a barrier.)The 50kg Half-bridge Experiments Body Scale Load Cell Sensor is measured; the correct force is applied to the outer side of the strain E-shaped beam portion of the sensor (i.e., a strain gauge affixed to the intermediate, adhesive coating with white beam arms); and the outer edges to form a shear force in the opposite direction, i.e., middle strain beam bending necessary changes can occur under stress, strain beam side by another force should not be a barrier.

Datasheet

Download Datasheet from the link given below.