Arduino Nano V3.0 With USB Cable
Arduino Nano V3.0 With USB Cable overview
The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3. x) It has more or less the same functionality as the Arduino Uno but in a different package. Arduino Nano lacks only a DC power jack and works with a Mini-B USB cable instead of a standard one.
Key specifications
Microcontroller
ATmega328 (Arduino nano)
Operating Voltage
5 V
Input Voltage (recommended)
7-12 V
Digital I/O Pins
14 (of which 6 provide PWM output)
Analog Input Pins
8
DC Current per I/O Pin
40 mA
Flash Memory
16 KB (ATmega168) or 32 KB (ATmega328)
SRAM
1 KB (ATmega168) or 2 KB (ATmega328)
Datasheet
2283855.pdf
Format PDFSize 1.9 MBLanguage EN
Third-party / unverified source
Arduino Nano V3.0 With USB Cable features
- Automatic reset during program download
- Power OK blue LED
- Green (TX), red (RX), and orange (L) LED
- Auto-sensing/switching power input
- Small mini-B USB for programming and serial monitor
- ICSP header for direct program download
- Standard 0.1” spacing DIP (breadboard friendly)
- Manual reset switch
Arduino Nano V3.0 With USB Cable specifications
| Microcontroller | ATmega328 (Arduino nano) |
|---|---|
| Operating Voltage | 5 V |
| Input Voltage (recommended) | 7-12 V |
| Digital I/O Pins | 14 (of which 6 provide PWM output) |
| Analog Input Pins | 8 |
| DC Current per I/O Pin | 40 mA |
| Flash Memory | 16 KB (ATmega168) or 32 KB (ATmega328) |
| SRAM | 1 KB (ATmega168) or 2 KB (ATmega328) |
| EEPROM | 512 bytes (ATmega168) or 1 KB (ATmega328) |
| Clock Speed | 16 MHz |
| Dimensions | 0.73" x 1.70" |
| Weight | 5 g |
Comments 0
Leave a comment