DWIN 7.0 Inch Touch Screen Monitor 800x480 TFT LCD Display Screen Touchscreen Module
7.0 Inch Touch Screen Monitor
7.0 Inch Touch Screen Monitor overview
DMG80480L070_01WTR is the intelligent screen with UART PORT which can be controlled by ANY MCU via commands, so it can be used as TFT Display & Touch controller in various electronic equipment. The LCD display screen panel, touch LCD screen, and DWIN display is your best choice for the HMI project. GUI kernel could support the UI Interface design based on DWIN designed software tool, with powerful functions, including data, text, curves, basic graphics, key-value upload, etc. OS kernel could be open to customers for second development, under OS compile, strengthening the GUI function. Any MCU can be connected with DWIN bright display. Modbus is supported to communicate with PLC.
Key specifications
Touch Mode
Support point touch and drag
Surface Hardness
3H
Structure
ITO film + ITO glass
Type
RTP (Resistive touch panel)
Light Transmittance
Over 80%
Life
Over 1,000,000 times touch
LCM interface
FPC40_0.5mm, RGB interface
RTP interface
FPC4_1.0mm
7.0 Inch Touch Screen Monitor features
- T5L platform, 7.0 Inches, 16.7M Colors, 800*480 Pixel TFT LCD
- Resistive touch panel
- Support 90-degrees, 180-degrees, 270 degrees screen rotation
- TTL/RS232 available
- Net Weight:215g
- 8Pin_2.0mm connection wire
- Two Development modes: DGUS II/ TA(Instruction set)
- Support animation, data, text, curve display, and so on, without any code
- Independent GUI and OS kernel, OS can be programmed by DWIN OS language or Keil C51.
7.0 Inch Touch Screen Monitor specifications
| Touch Mode | Support point touch and drag |
|---|---|
| Surface Hardness | 3H |
| Structure | ITO film + ITO glass |
| Type | RTP (Resistive touch panel) |
| Light Transmittance | Over 80% |
| Life | Over 1,000,000 times touch |
| LCM interface | FPC40_0.5mm, RGB interface |
| RTP interface | FPC4_1.0mm |
| Baudrate | 3150~3225600bps, a typical value of 115200bps |
| Output Voltage | Output 1, Iout = 8mA;3.0~4.5 V...Output 0, Iout = -8mA;0~0.3 V |
| Input Voltage (RDX) | Input 1；2.7~3.3V... Input 0；0~1.2V |
7.0 Inch Touch Screen Monitor applications
- Recommended end applications of DWIN T5Lcommercial grade and industrial grade HMI LCD displays: Home applications, Printers and 3D printers, Smart Home Control Sytems, EV charger piles, Industrial Machines, Heat Pumps, Lab and detector equipment, etc.
More about 7.0 Inch Touch Screen Monitor
Datasheet 7.0 Inch Touch Screen Monitor
Download the Datasheet from the link given below.
Comments 0
Leave a comment