Skip to content
Trademarks and datasheets are the property of their respective owners

LP298XS Datasheet – Low Dropout Regulator With Shutdown

100-mA Ultra-Low Dropout Regulators With Shutdown

Published Updated 4 views
Package SOT-23 5Pin Type
LP298XS-IC

LP298XS overview

The LP298XS is a 100-mA Ultra-Low Dropout Regulators With Shutdown made by Texas Instruments, supplied in an SOT-23 5Pin Type package. The absolute maximum ratings table on this page lists the 11 limits from the manufacturer's datasheet that must not be exceeded. This page brings together the LP298XS pinout and maximum ratings, with the full datasheet PDF to preview below or download.

The LP2980 is a 50 mA, fixed-output voltage regulator de- signed specifically to meet the requirements of battery- powered applications.

Using an optimized VIP™ (Vertically Integrated PNP) process, the LP2980 delivers unequaled performance in all specifications critical to battery-powered designs:

Dropout Voltage. Typically 120 mV @ 50 mA load, and 7 mV @ 1 mA load. Ground Pin Current. Typically 375 µA @ 50 mA load, and 80 µA @ 1 mA load. Sleep Mode. Less than 1 µA quiescent current when ON/ OFF pin is pulled low.

Smallest Possible Size. SOT-23 and micro SMD packages use an absolute minimum board space. Minimum Part Count. Requires only 1 µF of external capacitance on the regulator output. Precision Output. 0.5% tolerance output voltages available (A grade).

5.0V, 3.3V, and 3.0V versions available as standard products.

Datasheet

lp2980-datasheet.pdf
Format PDFSize 838 KBLanguage EN
Third-party / unverified source

LP298XS features

  • Ultra low dropout voltage
  • Output voltage accuracy 0.5% (A Grade)
  • Guaranteed 50 mA output current
  • Smallest possible size (SOT-23, micro SMD package)
  • Requires only 1 µF external capacitance
  • < 1 µA quiescent current when shutdown
  • Low ground pin current at all load currents
  • High peak current capability (150 mA typical)
  • Wide supply voltage range (16V max)
  • Fast dynamic response to line and load
  • Low ZOUT over wide frequency range
  • Overtemperature/overcurrent protection
  • −40˚C to +125˚C junction temperature range

LP298XS pinout

LP298XS pinout diagram
NameDescription
VINInput Voltage
GNDCommon Ground (device substrate)
ON/OFFLogic high enable input
N/CPost package trim - do not connect to this pin
VOUTRegulated output voltage

Absolute maximum ratings

ParameterValue
Storage Temperature Range−65˚C to +150˚C
Operating Junction Temperature Range−40˚C to +125˚C
Lead Temperature (Soldering, 5 sec.)260˚C
ESD Rating2kv
Power DissipationInternally Limited
Input Supply Voltage (Survival)−0.3V to +16V
Input Supply Voltage (Operating)2.1V to +16V
Shutdown Input Voltage (Survival)−0.3V to +16V
Output Voltage (Survival)−0.3V to +9V
IOUT (Survival)Short Circuit Protected
Input-Output Voltage (Survival),−0.3V to +16V

LP298XS applications

  • Cellular Phone
  • Palmtop/Laptop Computer
  • Personal Digital Assistant (PDA)
  • Camcorder, Personal Stereo, Camera

LP298XS datasheet PDF preview

PDF · 838 KB

Comments 0

Leave a comment