Skip to content
Trademarks and datasheets are the property of their respective owners

M27C202 Datasheet – 2 Mbit (128Kb x16) EPROM IC

2 MBIT (128KB X16) UV EPROM AND OTP EPROM

Published Updated 2 views
Package DIP, TSOP 40 Pin, PLCC 44 Pin Type
M27C202-IC

M27C202 overview

The M27C202 is a 2 MBIT (128KB X16) UV EPROM AND OTP EPROM made by STMicroelectronics, supplied in these packages: DIP, TSOP 40 Pin, PLCC 44 Pin Type. Main ratings: ACCESS TIME 45ns; PROGRAMMING VOLTAGE 12.75V ± 0.25V; PROGRAMMING TIME 100ms/word; ELECTRONIC SIGNATURE Manufacturer Code 20h Device Code: 1Ch. The absolute maximum ratings table on this page lists the 7 limits from the manufacturer's datasheet that must not be exceeded. This page brings together the M27C202 pinout, key specifications and maximum ratings, with the full datasheet PDF to preview below or download.

The M27C202 is a 2 Mbit EPROM offered in the two ranges UV (ultra violet erase) and OTP (one time programmable). It is ideally suited for microprocessor systems requiring large programs, in the application where the contents is stable and needs to be programmed only one time, and is organized as 131,072 by 16 bits has a transparent lids which allow the user to ex- pose the chip to ultraviolet light to erase the bit pat- tern. A new pattern can then be written to the device by following the programming procedure. For applications where the content is programmed only one time and erasure is not required, the M27C202 is offered in PDIP40, PLCC44 and TSOP40 (10 x 14 mm) packages

Key specifications

ACCESS TIME
45ns
PROGRAMMING VOLTAGE
12.75V ± 0.25V
PROGRAMMING TIME
100ms/word
ELECTRONIC SIGNATURE Manufacturer Code
20h Device Code: 1Ch
Manufacturer Code
20h
Device Code
1Ch

Datasheet

m27c202-datasheet.pdf
Format PDFSize 103 KBLanguage EN
Third-party / unverified source

M27C202 features

  • 5V ± 10% SUPPLY VOLTAGE in READ OPERATION
  • LOW POWER CONSUMPTION: Active Current 50mA at 5MHz Standby Current 100mA
  • Active Current 50mA at 5MHz
  • Standby Current 100mA

M27C202 pinout

M27C202 pinout diagram
NameDescription
A0 - A16Address Inputs
Q0 - Q15Data Outputs
EChip Enable
GOutput Enable
PProgram
VppProgram Supply
VccSupply Voltage
VssGround
NCNot Connected Internally

Absolute maximum ratings

ParameterSymbolValueUnit
Ambient Operating Temperature (3)TA–40 to 125°C
Temperature Under BiasTBIAS–50 to 125°C
Storage TemperatureTSTG–65 to 150°C
Input or Output Voltage (except A9)VIO (2)–2 to 7V
Supply VoltageVCC–2 to 7V
A9 VoltageVA9 (2)–2 to 13.5V
Program Supply VoltageVPP–2 to 14V

M27C202 applications

  • Code Storage Solutions
  • Memory Expansion
  • Program Storage
  • Microcontroller Support

M27C202 datasheet PDF preview

PDF · 103 KB

Comments 0

Leave a comment