Skip to content
Trademarks and datasheets are the property of their respective owners

NE5534AP Datasheet – Low-Noise Operational Amplifiers IC

NE5534x, SA5534x Low-Noise Operational Amplifiers

Published Updated 5 views
Package DIP 9 pin

NE5534AP overview

The NE5534AP is an NE5534x, SA5534x Low-Noise Operational Amplifiers made by Texas Instruments, supplied in a DIP 9 pin package. The absolute maximum ratings table on this page lists the 6 limits from the manufacturer's datasheet that must not be exceeded. This page brings together the NE5534AP pinout and maximum ratings, with the full datasheet PDF to preview below or download.

The NE5534, NE5534A, SA5534, and SA5534A devices are high-performance operational amplifiers combining excellent dc and ac characteristics. Some of the features include very low noise, high output drive capability, high unity-gain and maximum-output swing bandwidths, low distortion, and high slew rate.

These operational amplifiers are compensated internally for a gain equal to or greater than three. Optimization of the frequency response for various applications can be obtained by use of an external compensation capacitor between COMP and COMP/BAL. The devices feature input-protection

diodes, output short-circuit protection, and offset- voltage nulling capability with use of the BALANCE and COMP/BAL pins (see Figure 10).

For the NE5534A and SA5534A devices, a maximum limit is specified for the equivalent input noise voltage.

Datasheet

ne5534-datasheet-2.pdf
Format PDFSize 110 KBLanguage EN
Third-party / unverified source

NE5534AP features

  • Equivalent Input Noise Voltage
  • 3.5 nV/√Hz Typ
  • Unity-Gain Bandwidth 10 MHz Typ
  • Common-Mode Rejection Ratio 100 dB Typ
  • High DC Voltage Gain 100 V/mV Typ
  • Peak-to-Peak Output Voltage Swing 32 V Typ
  • With VCC± = ±18 V and RL = 600 Ω
  • High Slew Rate 13 V/μs Typ
  • Wide Supply-Voltage Range ±3 V to ±20 V
  • Low Harmonic Distortion
  • Offset Nulling Capability
  • External Compensation Capability

NE5534AP pinout

NE5534AP pinout diagram
PinNameDescription
1BALANCEExternal frequency compensation
8COMP/BALExternal offset voltage adjustment/External frequency compensation
5COMPExternal offset voltage adjustment
3IN+Noninverting input
2IN-Inverting Input
6OUTOutput
7VCC+Positive Supply
4VCC-Negative Supply

Absolute maximum ratings

ParameterValue
VCCSupply voltage (2) / VCC+ / 0 / 22 / V
VCC––22 / 0 / V
Input voltage, either input (2)(3)VCC– / VCC+ / V
Input current (4)–10 / 10 / mA
Duration of output short circuit (5)Unlimited
TJOperating virtual-junction temperature / 150 / °C

NE5534AP applications

  • Audio Preamplifiers
  • Servo Error Amplifiers
  • Medical Equipment
  • Telephone Channel Amplifiers

NE5534AP datasheet PDF preview

PDF · 110 KB

Comments 0

Leave a comment