Raspberry Pi Model B+ Development Board
Raspberry Pi Model B+ Development Board overview
The Raspberry Pi Model B+ is a single-board computer developed in the UK by the Raspberry Pi Foundation. The Raspberry Pi Model B+ is a credit-card sized computer that plugs into your TV/Monitor only requiring a mouse and a keyboard as additional peripherals. The Model B+ is the higher-spec variant of the Raspberry Pi model B. It replaced the original Raspberry Pi 1 Model B computer back in July of 2014.
Raspberry Pi Model B+ incorporates a number of enhancements and new features such as improved power consumption, increased connectivity and greater IO are among the improvements to this powerful, small and lightweight ARM based computer.
Key specifications
Chip
Broadcom BCM2835 SoC
Core architecture
ARM11
CPU
700 MHz Low Power ARM1176JZFS Applications Processor
GPU
Dual Core VideoCore IV® Multimedia Co-Processor, Provides Open GL ES 2.0, hardware accelerated OpenVG, and 1080p30 H.264 high-profile decode, Capable of 1Gpixel/s, 1.5Gtexel/s or 24GFLOPs wi
Memory
512MB SDRAM
Dimensions
85 x 56 x 17mm
Power
Micro USB socket 5V, 2A
Ethernet
10/100 BaseT Ethernet socket
Datasheet
pi-specs.pdf
Raspberry Pi Model B+ Development Board features
- 512 MB SDRAM memory
- Broadcom BCM2835 SoC full high definition multimedia processor
- Dual Core Video Core IV Multimedia coprocessor
- Single 2.0 USB connector
- HDMI (rev 1.3 and 1.4) Composite RCA (PAL & NTSC) Video Out
- 3.5 MM Jack, HDMI Audio Out
- MMC, SD, SDIO Card slot on board storage
- Linux Operating system
- Dimensions are 8.6cm*5.4cm*1.7cm
- On board 10/100 Ethernet RJ45 jack
Raspberry Pi Model B+ Development Board pinout
| Pin | Name | Description |
|---|---|---|
| 1 | 3.3v DC | Chip Supply Voltage 3.3V |
| 2 | 5v DC | Chip Supply Voltage 5V |
| 3 | GPIO 02 | General Purpose I/O 2 (SDA1, 12C) |
| 4 | 5v DC | Chip Supply Voltage 5V |
| 5 | GPIO 03 | General Purpose I/O 3 (SCL1, 12C) |
| 6 | Ground | Ground Pin |
| 7 | GPIO 04 | General Purpose I/O 4 (GPIO_GCLK) |
| 8 | GPIO 14 | General Purpose I/O 14 (TXD0) |
| 9 | Ground | Ground Pin |
| 10 | GPIO 15 | General Purpose I/O 15 (RXD0) |
| 11 | GPIO 17 | General Purpose I/O 17 (GPIO_GENO) |
| 12 | GPIO 18 | General Purpose I/O 18 (GPIO_GEN1) |
| 13 | GPIO 27 | General Purpose I/O 27 (GPIO_GEN2) |
| 14 | Ground | Ground Pin |
| 15 | GPIO 22 | General Purpose I/O 22 (GPIO_GEN3) |
| 16 | GPIO 23 | General Purpose I/O 23 (GPIO_GEN4) |
| 17 | 3.3v | Chip Supply Voltage 3.3V |
| 18 | GPIO 24 | General Purpose I/O 24 (GPIO_GEN5) |
| 19 | GPIO 10 | General Purpose I/O 10 (SPI_MOSI) |
| 20 | Ground | Ground Pin |
| 21 | GPIO09 | General Purpose I/O 9 (SPI_MISO) |
| 22 | GPIO 25 | General Purpose I/O 25 (GPIO_GEN6) |
| 23 | GPIO11 | General Purpose I/O 11 (SPI_CLK) |
| 24 | GPIO 08 | General Purpose I/O 8 (SPI_CEO_N) |
Show all 40 pins
| Pin | Name | Description |
|---|---|---|
| 25 | Ground | Ground Pin |
| 26 | GPIO 07 | General Purpose I/O 7 (SPI_CE1_N) |
| 27 | ID_SD | (12C ID EEPROM) |
| 28 | ID_SC | (12C ID EEPROM) |
| 29 | GPIO 05 | General Purpose I/O 5 |
| 30 | Ground | Ground Pin |
| 31 | GPIO 06 | General Purpose I/O 6 |
| 32 | GPIO 12 | General Purpose I/O 12 |
| 33 | GPIO 13 | General Purpose I/O 13 |
| 34 | Ground | Ground Pin |
| 35 | GPIO 19 | General Purpose I/O 19 |
| 36 | GPIO 16 | General Purpose I/O 16 |
| 37 | GPIO 26 | General Purpose I/O 26 |
| 38 | GPIO 20 | General Purpose I/O 20 |
| 39 | Ground | Ground Pin |
| 40 | GPIO 21 | General Purpose I/O 21 |
Raspberry Pi Model B+ Development Board specifications
| Chip | Broadcom BCM2835 SoC |
|---|---|
| Core architecture | ARM11 |
| CPU | 700 MHz Low Power ARM1176JZFS Applications Processor |
| GPU | Dual Core Video Core IV® Multimedia Co-Processor, Provides Open GL ES 2.0, hardware accelerated OpenVG, and 1080p30 H.264 high-profile decode, Capable of 1Gpixel/s, 1.5Gtexel/s or 24GFLOPs wi |
| Memory | 512MB SDRAM |
| Dimensions | 85 x 56 x 17mm |
| Power | Micro USB socket 5V, 2A |
| Ethernet | 10/100 BaseT Ethernet socket |
| Video Output | HDMI (rev 1.3 & 1.4) |
| Audio Output | 3.5mm jack, HDMI |
| USB | 4 x USB 2.0 Connector |
| GPIO Connector | 40-pin 2.54 mm (100 mil) expansion header: 2x20 strip Providing 27 GPIO pins as well as +3.3 V, +5 V and GND supply lines |
| Camera Connector | 15-pin MIPI Camera Serial Interface (CSI-2) |
| Display Connector | Display Serial Interface (DSI) 15 way flat flex cable connector with two data lanes and a clock lane |
Raspberry Pi Model B+ Development Board applications
- Edge computing
- Industrial applications
More about Raspberry Pi Model B+ Development Board
Specifications
- GPU: Dual Core VideoCore IV® Multimedia Co-Processor, Provides Open GL ES 2.0, hardware accelerated OpenVG, and 1080p30 H.264 high-profile decode, Capable of 1Gpixel/s, 1.5Gtexel/s or 24GFLOPs with texture filtering and DMA infrastructure
- Operating System Boots from Micro SD card, running a version of the Linux operating system
- Composite: RCA (PAL and NTSC)
- JTAG: Not populated
- Memory Card Slot SDIO
Datasheet
See Also: CD4059 Program Divide-by-N Counter | Espressif ESP8266 Serial ESP-01 WiFi Module | HMC5883L 3-Axis Magnetometer Module
Comments 0
Leave a comment