SIL9135 Datasheet – HDMI v1.3 Receiver
SIL9135 overview
The SIL9135 is an HDMI V1.3 Receiver, supplied in a TQFP 144 Pin type. package. The absolute maximum ratings table on this page lists the 11 limits from the manufacturer's datasheet that must not be exceeded. This page brings together the SIL9135 pinout and maximum ratings, with the full datasheet PDF to preview below or download.
The SiI9135 is a second generation HDMI v1.3 Receiver. It is software compatible with the SiI9133, but adds audio support for DTS-HD and Dolby TrueHD. Digital televisions that can display 10/12-bit color depth can now provide the highest quality protected digital audio/video over a single cable. The SiI9135 can receive deep color video up to 12-bit, 1080p@60Hz. Backward compatibility with DVI 1.0 allows HDMI systems to connect to existing DVI 1.0 hosts, such as HD set-top boxes and PCs. The specialized audio and video processing contained in the receiver can add HDMI capability to earlier- generation consumer electronics. Efficient color space conversion receives RGB video data and outputs either standard-definition or high-definition YCbCr formats.
The SiI9135 can send and receive up to eight channels of uncompressed digital audio at 192 kHz and 2-channel digital audio up to 192 kHz.
Compressed streams are also supported through either the S/PDIF port or over I2S for DTS-HD and Dolby TrueHD. An industry-standard I2S port allows direct connection to low-cost audio DACs at up to 192 kHz. An S/PDIF port supports up to 192 kHz audio. The SiI9135 supports SACD (Super Audio Compact Disc) and provides DSD (Direct Stream Digital) ports that support 44.1 and 88.2 kHz one-bit audio. Audio down-sampling allows the SiI9135 to share the audio bus with a high-sample-rate audio DAC while down-sampling audio for an attached display that supports only lower rates.
The SiI9135 also comes pre-programmed with HDCP keys. This set of keys simplifies the manufacturing process and lowers costs, while providing the highest level of HDCP key security. Silicon Image’s HDMI Receivers use the latest generation of TMDS core technology. These TMDS cores pass all HDMI compliancy tests.
Datasheet
SIL9135 features
- Dual-Input HDMI 1.3, HDCP 1.1, and DVI 1.0 compliant Receiver
- Integrated TMDS® core running at 25 – 225 MHz
- Digital video interface supports video processors: 36-bit RGB / YCbCr 4:4:4
- 36-bit RGB / YCbCr 4:4:4
- o 16/20/24-bit YCbCr 4:2:2
- o 8/10/12-bit YCbCr 4:2:2 (ITU BT.656)
- Color Space Conversion for both RGB- to-YCbCr and YCbCr-to-RGB (both 601 and 709) True 12-bit accurate data using 14-bit processing
- True 12-bit accurate data using 14-bit processing
- Auto video mode configuration simplifies system firmware design
- Digital audio interface supports high-end audio systems
- DTS-HD and Dolby TrueHD high bit rate audio support
- 4 x I2S inputs accept Dolby Digital, DVD- Audio input (2-channel 192 kHz, 8- channel 192 kHz)
- S/PDIF input supports PCM, Dolby Digital, DTS digital audio transmission (32-192 kHz Fs sample rate)
- IEC60958 or IEC61937 compatible
- Flexible, programmable I2S channel mapping
- 2:1 and 4:1 down-sampling to handle 96 kHz and 192 kHz audio streams.
- Pre-programmed HDCP keys provide highest level of key security and simplify
- manufacturing
- Full support for HDCP Repeaters (up to 16 attached downstream devices)
- Built in HDCP BIST
- Software compatible with SiI 9033 and SiI 9133 o Additional register programming required for deep color, DTS-HD and Dolby TrueHD support
- o Additional register programming required for deep color, DTS-HD and Dolby TrueHD support
- Flexible power management
- 20 mm x 20 mm 144-pin TQFP package with ePad
SIL9135 pinout
Absolute maximum ratings
| Parameter | Symbol | Value | Unit |
|---|---|---|---|
| I/O Pin Supply Voltage | IOVCC33 | Min -0.3 / Max 4.0 / Note 1, 2, 3 | V |
| TMDS PLL #0 Supply Voltage | AVCC18 | Min -0.3 / Max 2.5 / Note 1, 2 | V |
| TMDS Analog Supply Voltage | AVCC33 | Min -0.3 / Max 4.0 / Note 1, 2 | V |
| Audio PLL Supply Voltage | DVCC18 | Min -0.3 / Max 2.5 / Note 1, 2, 3 | V |
| Digital Core Supply Voltage | CVCC18 | Min -0.3 / Max 2.5 / Note 1, 2, 3 | V |
| ACR PLL Crystal Oscillator Supply Voltage | XTALVCC | Min -0.3 / Max 4.0 / Note 1, 2 | V |
| ACR PLL Regulator Supply Voltage | REGVCC | Min -0.3 / Max 4.0 / Note 1, 2 | V |
| Input Voltage | VI | Min -0.3 / Max IOVCC33+ 0.3 / Note 1, 2 | V |
| Input Voltage on 5V Tolerant Pins | V5V-Tolerant | Min -0.3 / Max 5.5 / Note 5 | V |
| Junction Temperature | TJ | Max 125 | °C |
| Storage Temperature | TSTG | Min -65 / Max 150 | °C |
Comments 0
Leave a comment