SSD1306 0.96 inches 128X64 I2C Arduino OLED Display LCD
SSD1306 overview
This 0.96-inch OLED display is based on a popular SSD 1306 display controller. This OLED display module works on both I2C (and TWI). The display is small in size and very crisp. This LCD screen board has a resolution of 128 x 64 pixels. It is ideal for projects, where you want, to display graphics, bitmaps, and fonts of various sizes. This LED 128X64, I2C Arduino is based on popular display controller libraries available for Raspberry Pi, Arduino, AVR, PIC, and ARM microcontrollers.
Key specifications
High resolution
128 * 64
Viewing angle
> 160 °
Supports many control chip
Fully compatible with Arduino, 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc.
Ultra-low power consumption
0.08W
Voltage
3V ~ 5V DC
Working Temperature
-30 ? ~ 70
Module Size
27.0MM * 27.0MM * 4.1MM
Interface
I2C/IIC Interface needs 2 IO only
Datasheet
ssd1306.pdf
Format PDFSize 1.8 MBLanguage ENRevision Rev. 1.1, Apr 2008
Third-party / unverified source
SSD1306 features
- Resolution: 128 x 64 dot matrix panel
- Power supply
- For matrix display
SSD1306 specifications
| High resolution | 128 * 64 |
|---|---|
| Viewing angle | > 160 ° |
| Supports many control chip | Fully compatible with Arduino, 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc. |
| Ultra-low power consumption | 0.08W |
| Voltage | 3V ~ 5V DC |
| Working Temperature | -30 ? ~ 70 |
| Module Size | 27.0MM * 27.0MM * 4.1MM |
| Interface | I2C/IIC Interface needs 2 IO only |
| Driver IC | SSD1306 |
More about SSD1306
Features of SSD1306 0.96 inches Display LCD
- Needn’t backlight, the display unit can self-luminous
- The display is self-illuminating
- Power requirement is low
- They are offering a large viewing angle
- The ultra-low power consumption of around 0.08w at full-screen lit.
Comments 0
Leave a comment