Skip to content
Trademarks and datasheets are the property of their respective owners

STM32F401 line Discovery kit

Published Updated 5 views
Package LQFP-100 Series STM32

STM32F401 overview

The STM32F401 is a Line Discovery kit made by STMicroelectronics, supplied in an LQFP-100 package. The full STM32F401 datasheet PDF can be previewed below or downloaded.

The STM32F401 microcontrollers are part of the STM32 Dynamic Efficiency™ device range. These devices offer the best balance of dynamic power consumption (in run mode) and processing performance while integrating a high number of added-value features in packages as small as 3 x 3 mm.

The MCUs deliver the performance of Cortex®-M4 core with a floating point unit, running at 84 MHz while achieving outstandingly low power consumption values in the run and stop modes.

Datasheet

dm00093902-env1-1.pdf
Format PDFSize 1.9 MBLanguage ENRevision Rev. 1
Third-party / unverified source

STM32F401 features

  • STM32F401VCT6 microcontroller featuring 256 KB of Flash memory, 64 KB of RAM in
  • On-board ST-LINK/V2 with selection mode switch to use the kit as a standalone ST
  • Board power supply: through USB bus or from an external 5 V supply voltage
  • External application power supply: 3 V and 5 V
  • L3GD20, ST MEMS motion sensor, 3-axis digital output gyroscope.
  • LSM303DLHC, ST MEMS system-in-package featuring a 3D digital linear acceleration
  • MP45DT02, ST MEMS audio sensor, omnidirectional digital microphone
  • CS43L22, audio DAC with integrated class D speaker driver
  • Eight LEDs
  • Two pushbuttons (user and reset)
  • USB OTG with micro-AB connector
  • Extension header for LQFP100 I/Os for a quick connection to the prototyping board

STM32F401 applications

  • Windows PC (XP, Vista, 7)
  • USB type A to mini-B cable
  • Altium: TASKING™ VX-Toolset
  • Atollic: TrueSTUDIO
  • IAR: EWARM
  • Keil™: MDK-ARM
  • STM32F401VCT6 microcontroller featuring 256 KB of Flash memory, 64 KB of RAM in
  • On-board ST-LINK/V2 with selection mode switch to use the kit as a standalone ST
  • Board power supply: through USB bus or from an external 5 V supply voltage
  • External application power supply: 3 V and 5 V
  • L3GD20, ST MEMS motion sensor, 3-axis digital output gyroscope.
  • LSM303DLHC, ST MEMS system-in-package featuring a 3D digital linear acceleration
  • MP45DT02, ST MEMS audio sensor, omnidirectional digital microphone
  • CS43L22, audio DAC with integrated class D speaker driver
  • Eight LEDs

STM32F401 datasheet PDF preview

PDF · 1.9 MB

Comments 0

Leave a comment