Skip to content
Trademarks and datasheets are the property of their respective owners

TP5000 LiFePO4 Lithium Iron Phosphate Battery Charger

Published Updated 12 views
Package QFN-16

TP5000 overview

This is a Charging Module for the Lithium Battery based on the TP5000 Battery Charging IC. This module can charge a lithium battery with a current of up to 1A. This module has advanced features like battery temperature protection, reverse battery shutdown, and short circuit protection.

The charging module comes with a dual color led, which is used to denote the charging and full status of the battery. The module also serves as a battery protection board, with a built-in automatic recharge function it will automatically charge the battery when it gets fully discharged

Key specifications

Color
Red
Size
21.5 * 14.5 * 4.2mm
Material
Metal
Input
4.5-9V
Output voltage
4.2V / 3.6V plus or minus 1% (circuit board default lithium-ion battery 4.2V)
Output current
Default 1A

Datasheet

datovylist-313584-1-m401d.pdf
Format PDFSize 303 KBLanguage EN
Third-party / unverified source

TP5000 features

  • Copper strip 5A large current small volume inductance, fully closed magnetic low loss low interference!
  • Programmable Charge Current, 0.1A--2A
  • Programmable pre-Charge Current, 10% - 100%
  • Eliminates the need for an external Schottky diode anti-intrusion
  • Wide Operating voltage up to 9V
  • Two LED charge status indicator

TP5000 pinout

NameDescription
POWER IN(+ve)Power Input Positive
POWER IN(-ve)Power Input Negative
BATTERY(-ve)Battery Negative Pin
BATTERY(+ve)Battery Positive Pin

TP5000 datasheet PDF preview

PDF · 303 KB

Comments 0

Leave a comment