The UM3750 is a Programmable Encoder / Decoder, supplied in a DIP 18 Pin package. The absolute maximum ratings table on this page lists the 3 limits from the manufacturer's datasheet that must not be exceeded. This page brings together the UM3750 pinout and maximum ratings, with the full datasheet PDF to preview below or download.
The UM3750 Encoder/Decode is a code Transmitter-Receiver system. Working in the transmit (encoder) mode, the will sequentially encode and transmit 12 bits of input. Each of the 12 bits may be 1 or 0 to allow 4096 different codes.In the receive (decoder) mode, the incoming signal is compared to the local code a sequential manner Once an error IS detected the system reset and begin its comparison on the next word. If all 12 bits are received correctly, a “valid” signal is generated. This signal clears a 64ms counter and triggers a 3-stage counter. The 3-stage counter counts the “valid” pluses and when 4 pulses have been detected, the TX/RX output pin goes low. After the TX/RX output pin goes low, the next “valid” must be received within 128ms, giving a one valid in 6 requirement to keep the TX/RX output pin
Comments 0
Leave a comment