Skip to content
Trademarks and datasheets are the property of their respective owners

FS1000A 433mHz RF Transmitter Receiver Module

Published Updated 6 views
FS1000A 433mHz RF Transmitter Receiver Module

FS1000A overview

The FS1000A is a 433mHz RF Transmitter Receiver Module. Main ratings: Operation voltage 5V DC; Static Current 4MA; Receiver frequency 433.92MHZ; 315 Mhz; Sensitivity 105DB. This page brings together the FS1000A pinout and key specifications, with the full datasheet PDF to preview below or download.

This is FS1000A 433mHz Tx RF Radio Module. This RF module comprises an RF Transmitter and an RF Receiver. The transmitter-receiver (Tx/Rx) pair operates at a frequency of 433 MHz. An RF transmitter receives serial data and transmits it wirelessly through RF through its antenna connected at pin4. The transmission occurs at the rate of 1Kbps – 10Kbps. The transmitted data is received by an RF receiver operating at the same frequency as that of the transmitter.

This low-cost RF transmitter can be used to transmit signals up to 100 meters (the antenna design, working environment, and supply voltage will seriously impact the effective distance). This wireless module is good for short-distance, battery power device development. RF 433 MHz is the operating frequency for the transmitter and receiver pair.

FS1000A 433mHz RF Transmitter Receiver Module

Key specifications

Operation voltage
5V DC
Static Current
4MA
Receiver frequency
433.92MHZ; 315 Mhz
Sensitivity
105DB
Dimension
30*14*7mm
External Antenna
32CM signal wire, spiral

Datasheet

433mhz-rf-txrx.pdf
Format PDFSize 114 KBLanguage EN
Third-party / unverified source

FS1000A features

  • Wide Input Supply (2.5 V to 12V)
  • Easy to integrate (V+, GND, and Data)
  • The Device is in deep sleep mode when the Data pin is grounded
  • Very Small Dimension

FS1000A pinout

FS1000A pinout diagram
NameDescription
VccPower supply (+5V only)
DataData to be transmitted is sent to this pin
GroundConnected to the ground of the circuit
AntennaSolder wire/antenna to improve range (not mandatory)

FS1000A applications

  • Wireless communication between microcontrollers or Arduino boards.
  • Remote control systems for home automation and appliances.
  • Wireless sensor networks for data transmission and monitoring.
  • Keyless entry systems for vehicles or buildings.
  • Garage door openers and remote-controlled gates.
  • Remote weather monitoring and data transmission.
  • Wireless security systems for intrusion detection and alarm systems.
  • Remote-controlled toys and hobby projects.
  • Wireless audio transmission for audio systems or intercoms.
  • Industrial automation systems requiring wireless communication.

FS1000A datasheet PDF preview

PDF · 114 KB

Comments 0

Leave a comment