GY-NEO6MV2 overview
GY-NEO6MV2 module series is a family of stand-alone GPS receivers featuring the high-performance ublox 6 positioning engine. The module simply checks its location on earth and provides output data which is the longitude and latitude of its position. GY-NEO6MV2 comes with a small battery for hot-start, along with a built-in EEPROM. To offer better signal reception, there is an external ceramic antenna that connects to the board via a U.FL connector
GY-NEO6MV2 GPS module can track up to 22 satellites over 50 channels and achieve the industry’s highest level of tracking sensitivity i.e. -161 dB while consuming only 45 mA current. Its compact architecture, modular design, power, and memory options make NEO6MV2 modules ideal for battery-operated mobile devices with very strict cost and space constraints.
Key specifications
Datasheet
GY-NEO6MV2 features
- Based on u-Blox NEO-6M GPS module with onboard backup battery and built-in EEPROM.
- Comes with an external U.FL ceramic antenna for better reception.
- It is compatible with various flight controller boards designed to work with a GPS module, APM2.0, and APM2.5 just to name a few.
- This module has a built-in voltage regulator and it is sometimes referred to as GY-GPS6MV2.
- Navigate down to –162 dBm and –148 dBm cold start
- EEPROM to save configuration settings
- Faster acquisition with Assist Now Autonomous
- Configurable power management
- Hybrid GPS/SBAS engine (WAAS, EGNOS, MSAS)
- Standalone GPS receiver
- Anti-jamming technology
- Compatible with u-Blox GPS Solution for Android
- A-GPS: Assist Now Online and Assist Now Offline services OMA SUPL compliant
- Under 1 second time-to-first-fix for hot and aided starts
- Time-To-First-fix: For Cold Start 32s, For Warm Start 23s, For Hot Start <1s
- UART Interface at the output pins (Can use SPI, I2C, and USB by soldering pins to the chip core)
GY-NEO6MV2 pinout
| Pin | Name | Description |
|---|---|---|
| 1 | Vcc | Chip Supply Voltage |
| 2 | RX | UART receive pin |
| 3 | TX | UART transmit pin |
| 4 | GND | Ground pin |
GY-NEO6MV2 specifications
| Operating voltage | 3.3V to 5VDC. |
|---|---|
| Communication interface | UART TTL, 9600bps. |
| Operating Current | 45mA |
| TXD/RXD Impedance | 510Ω |
| Navigation Sensitivity | -161dBm |
| Capture Time | Cool start (27sec), Hot start (1sec) |
| Communication Protocol | NMEA, UBX Binary, RTCM |
| Serial Baud Rate | 4800-230400 (default 9600) |
| Type | 50 channels, GPS L1(1575.42Mhz) |
| Horizontal Position Accuracy | 2.5m |
| Navigation Update Rate | 1HZ (5Hz maximum) |
| Dimension | 36 x 26 mm. |
| Weight | 22g. |
GY-NEO6MV2 applications
- GPS Navigation Systems
- Aircraft Positioning
More about GY-NEO6MV2
NEO6MV2 Specifications
- LED signal indicator.
- Pin-out for power and interface
- Operating Temperature -40°C ~ 85°C
Datasheet GY-NEO6MV2
See Also: CD4059 Program Divide-by-N Counter | YX5300 MP3 Music Player UART Control Serial Module | 16×2 LCD Character Display Module
Comments 0
Leave a comment