HX-3S-F100A 100A 3S BMS 18650 Battery Protection Board
HX-3S-F100A overview
This HX-3S-F100A-based 100A BMS board is also called (a battery management system ). HX-3S-F100A is a protection board for li-ion 18650 cells. There are 10 MOSFET, a strong heat-dissipating aluminum sheet installed on it, and the continuous current limit is 100A. It is suitable for 3-series lithium battery packs such as inverters, xenon lamps, and solar street lamps.
Key specifications
Overcharge voltage range
4.28v±0.05v/ per cell
Size
70*60*8.5mm
Over-discharge voltage range
2.5±0.05v
Upper limit working current
100A (pay attention to heat dissipation)
Working temperature
-40~+50°C
Upper limit instantaneous current
100-120A
Storage condition
-40~+80°C
Quiescent current
less than 30uA
Datasheet
18650-tenergy.pdf
Format PDFSize 203 KBLanguage EN
Third-party / unverified source
HX-3S-F100A specifications
| Overcharge voltage range | 4.28v±0.05v/ per cell |
|---|---|
| Size | 70*60*8.5mm |
| Over-discharge voltage range | 2.5±0.05v |
| Upper limit working current | 100A (pay attention to heat dissipation) |
| Working temperature | -40~+50°C |
| Upper limit instantaneous current | 100-120A |
| Storage condition | -40~+80°C |
| Quiescent current | less than 30uA |
| Effective life | more than 30,000 hours |
| Internal resistance | less than 300mΩ |
| Short circuit protection | protection, delay self-recovery. |
| Equilibrium current | 65 mA |
| Charging voltage | 12.6V-13V |
| Charging the current upper limit | 10A |
Comments 0
Leave a comment