Skip to content
Trademarks and datasheets are the property of their respective owners

TDA3118 Digital 2-Channel Stereo Audio Amplifier Board Module

Published Updated 7 views

TDA3118 overview

The Audio Amplifier Board Module TDA3118 is a limited version of the TDA3116D2. The limitation seems obtained by different packages for the two chips. This amplifier module is supplied in a plastic package (HTSSOP32) with a cooling pad turned downward on the PCB while the TPA3116D2 package has a cooling pad on the top for a heat sink. The 2-channel stereo module is described in the common data sheet as able to operate "without heat sink", which is no doubt correct for up to 19V supply voltage but may be arguable at full supply voltage.
The TDA3118 audio board module has a wide supply voltage range, even down to below 5 Volt. Being so versatile, it can be used for most audio applications in ordinary consumer products. For higher power levels TPA3118 is limited by the maximum supply voltage of 26V and the possibility to cool the chip.

Key specifications

Power amplifier chip
TPA3118
Applicable speaker impedance
4-8 ohm(8 ohm is the best)
Audio Input
Bluetooth Receiving
Power amplifier power
1*60W
Power supply voltage
8~24VDC
Size
46*35mm

Datasheet

tpa3118-datasheet.pdf
Format PDFSize 2.8 MBLanguage EN
Third-party / unverified source

TDA3118 features

  • Mono Digital Audio Power Amplifier Chip
  • High Output and low Power Consumption
  • Sound Quality is Very Good by Using this Module

TDA3118 pinout

NameDescription
Audio In(+)Audio Input Positive edge
Audio In(-)Audio Input Negative edge
Mute (Short Circuit Port)Short circuit Jumper circuit for active Mute
Power In (VCC/+)4.5v-24v DC power VCC
Power In (GND/-)4.5v-24v DC power Ground
Speaker Out(-)Speaker Negative Output
Speaker Out(+)Speaker Positive Output

TDA3118 datasheet PDF preview

PDF · 2.8 MB

Comments 0

Leave a comment